How to install the bathroom cabinet mirror
Jul 01, 2022
1. Punching installation method
The mirror above the bathroom cabinet can be connected with the wall cabinet, and it can also exist alone. If you want to install it on the wall alone, you must install the bracket in place in advance. At the same time, you also need to drill holes in the four corners of the mirror in advance, so it is a common behavior to drill holes and install them all over. According to this installation method, it is divided into upper and lower parts, because the upper part is just ordinary punching installation, and the lower part is connected with a small stainless steel hanging rod on its surface after the holes on the left and right sides in series, so that the towel can be hung here.
2. Paste installation method
There are also some relatively simple installation methods, but most of them are only combined with the wall side cabinet, because the bathroom cabinet has not only the main cabinet, but also the wall cabinet, and the wall cabinet is combined with the bathroom mirror. Generally, the finished bathroom cabinet mirrors purchased have been installed, so you don't need to paste them yourself, but if it's a product purchased online, you may have to operate it yourself. A relatively simple treatment method is to apply glass glue on the surface of the solid wood plate in the middle of the bathroom wall cabinet, and then put the bathroom cabinet mirror on it.
3. Embedded installation method
The so-called embedded installation method, in fact, is also combined with wall mapping, because the wall side cabinet is divided into two parts, the middle is the space left, and the left and right parts are mainly small grids. There is an obvious 3-5 mm space in the two small grids, and the bathroom cabinet is inserted from top to bottom, like a slide rail.
