What should I do when the glass glue beside the washing table is moldy and blackened?

1. Toilet cleaning spirit or 84 disinfectant

If the mildew is not very serious, pour a little toilet cleaner or 84 disinfectant into the moldy area. After a while, dip a soft bristled toothbrush in a little detergent and brush it neatly. You can also take a cloth belt, soak it with 84 disinfectant and stick it on the moldy and blackened area of the glass glue, so that you will find it neat the next day.

2. White rice vinegar

There is often hair blockage in the stainless steel sink of the washing table, which is also one of the reasons for its odor. It is not enough to just remove the hair. We pour a small spoon of edible salt out of the stainless steel sink, then pour a cup of edible vinegar, and finally pour some warm water. After a while, the washing table can not only be connected, but also become cleaner and cleaner.

3. Paper cutter

Use a paper cutter to shovel out the blackened and moldy glass glue. After shoveling off the glass glue, you can find that the inside of the edge is still very clean, only the glass glue is moldy. Take out the prepared glass glue. Squeeze the strong glue inside the glass glue out of the large channel, and then smooth the gap with your fingers.

4. Damp proof and mould removing adhesive tape

The stainless steel sink in the home is usually fixed on the surface of the table with silicone rubber when it is installed. Over time, the water trace will leak into the silicone rubber, causing blackening or mildew. The moisture-proof and mildew removing tape is pasted on the interface between the stainless steel sink and the cabinet table, which is waterproof and mildew removing, and it is not often easy to clean. It can also be used at the interface between the gas stove and the cabinet table, etc.

5. Whitening skin repairing tile sealant

Whitening skin repairing ceramic tile sealant has the sealing characteristics beyond glass glue. The key is that it is beautiful and durable. It can reasonably protect the inside and outside, prevent the release of peculiar smell, and can be used for whitening skin in toilets and cisterns. It can also be used for whitening skin in restaurants, kitchens and every corner of the home. It is very easy to use.

6. Glass glue mold remover

Professional glass gel mold remover, that is, everyone's mold removing gel cream, with mold removing gel cream immediately squeezed on top, all do not need to do, put it quietly. If it is a relatively light Aspergillus flavus, if it goes up and down in an hour, Aspergillus flavus will be dissolved. However, for dirt that is difficult to remove, in very dark areas, it is necessary to increase the amount and propose to put it for overnight, and remove it several times.

7. Bleach

Bleach is also a good choice. Bleach does not damage the sealant strip. You can cut the paper shape into the size of the sealant strip first. You can wet the paper shape with bleach and stick it on the sealant strip, then leave it for one night, and then gently remove the mildew spots with a soft brush the next day. However, you must pay attention to wiping it immediately after getting wet with water under normal circumstances.